What To Do If An Error Code Is Displayed - Brother GTX-4 Service Manual

4-2-2. What to do if an error code is displayed

<IMPORTANT>

If an error code 2080 to 2083 (CMYK), 2084 (W12), or 2085 (W34) is displayed, take out and check the cartridge.
Error code
2080
2081
・The sub tank is not filled within the specified time
2082
2083
・ You replaced the ink pouch and confirmed that the
specific amount of ink was consumed after the
state was detected, but the
cannot be detected.
2084
2085
・ You replaced the ink pouch and confirmed that the
specific amount of ink was consumed after the
state was detected, but the
cannot be detected.
Items to be checked
Is the ink pouch wound
up?
Is the cartridge ink level
detection plate operating?
Is the remaining ink level
properly displayed on the
panel?
Description
Description
If ink pouch wind-up failure occurs, the
remaining level cannot be correctly detected
If ink level detection plate operation failure
occurs, the remaining level cannot be
correctly detected
If the remaining ink level sensor is faulty, the
remaining level is not correctly displayed
・Ink pouch wind-up failure
・Ink pouch wind-up failure
・Remaining ink level detection failure
state
・Remaining ink level detection failure
state
Remedy
Solve the ink
pouch wind-up
failure
Check the
operation of the
ink level
detection plate
Assembly of the
ink level
detection plate
Check the
remaining ink
level sensor
Replace the
remaining ink
level detection
circuit board
4-68
Improvement of print quality
Possible Cause
Document
See "4-2-1. How to solve
ink pouch wind-up failure"
See "1-6-6. Characteristic
of ink cartridges"
See "6-1-34. Disassembly /
Assembly of ink cartridge"
See "1-6-6. Characteristic
of ink cartridges"
See "6-2-30. Replacement
of remaining ink level
detection circuit board"