After Replacing The Wiper, Is Such Failure Cleared? - Brother GTX-4 Service Manual

(10) After replacing the wiper, is such failure cleared?

(1) Have the supplied gloves and wiper ready.
(2) From the menu, select [Maintenance] > [Maintenance Part Clean/Replace], and press
<IMPORTANT>

If any other error or message is displayed on the operation panel or warning message window, follow the message to solve
the problem, then perform the cleaning.
<TIPS>
 Pressing
(3) Follow the on-screen message and turn off the power.
<IMPORTANT>

Please complete the task within 30 minutes, in order to prevent the print heads from drying up.

When the task will take more than 30 minutes to complete, after attaching the flushing receiver, wiper cleaner, and wiper,
close the front cover and turn on the power, then select [Maintenance Part Clean/Replace] again to restart the task. Then,
the head cleaning will be performed to prevent any ink from drying up.
(4) Open the front cover.
(5) Raise the wiper cleaner and move it to its upright position, and remove it by moving it upward.
<IMPORTANT>

Removed wiper cleaner should be placed with the cleaner side facing up.
<NOTE>

For a proper work operation, be sure to wear the printer-provided gloves.
causes the platen to start moving. Do not put anything around the platen.
Wiper cleaner
4-43
Improvement of print quality
.
Front cover
X0055