Setting Of The Time Displayed On The Nozzle Check Pattern - Brother GTX-4 Service Manual
Hide thumbs
Also See for GTX-4:
- Instruction manual (18 pages) ,
- Instruction manual (320 pages) ,
- Setup manual (37 pages)
Table of Contents
Advertisement
2-5-6. Setting of the time displayed on the nozzle check pattern
Set the time displayed on the nozzle check pattern.
(1)
Make sure that a connection of USB 2.0 cable or LAN cable is made between the printer and your PC.
(2)
On the PC, from [All Programs] in the Start menu, select the "GTX-4 Maintenance" of "Brother GTX-4 Tools".
(3)
After the window shown below appears, select [Setting of the time displayed on the nozzle check pattern] and click
[Next].
2-28
Installation and preparation
Advertisement
Table of Contents
