Print Head Mounting - Brother GTX-4 Service Manual

Hide thumbs Also See for GTX-4:

Table of Contents

Setup of the printer

There is no difference in white and color sides; they can be

mounted on either side.

Changing the heads of white side and color side

should be avoided once the inks are filled after

mounting the heads.

When you unpack the head, be careful not to

touch the bottom of the head. Otherwise it may

cause poor printing.

When you mount the head, shift the carriage

toward the center of the printer; to the position

above the platen. If you perform the mounting of

the head when the carriage is directly above the

maintenance unit, it may damage the

maintenance unit or the heads.

The gray area (a) illustrated above may be hard

and difficult to remove. If it is, use both hands to

Insert the head firmly to direction a.

When mounting the head, be careful not to move the

carriage as much as can be avoided. Your hand may be

caught in the carriage and injured. In addition, the tubes

may be rolled together possibly damaging them.