Table of Contents
Advertisement
3-6-7. Setting of the time displayed on the nozzle check pattern
Set the time displayed on the nozzle check pattern.
(1)
Make sure that the printer and PC are connected via a LAN cable.
(2)
On the PC, from [All Programs] in the Start menu, select "GTX-6 Extra Colors ORGR Maintenance" from "Brother
GTX-6 Extra Colors ORGR Tools".
(3)
After the window shown below appears, select [Setting of the time displayed on the nozzle check pattern] and click
[Next].
67
Installation and preparation
Advertisement
Table of Contents
Troubleshooting
