8.23 Belt Cleaner Release Sensor PCB ASSY
(1) Release the two Hooks to remove the Belt cleaner release ASSY from the Middle plate.
Middle plate
(2) Turn the Belt cleaner release ASSY upside down. Remove the bind B M3x8 Taptite screw,
and then remove the SOL PCB sheet and Belt cleaner release sensor PCB ASSY.
Belt cleaner release ASSY
Fig. 3-76
Taptite, bind B M3X8
Fig. 3-77
3-64
Hook
<Front side>
Hook
SOL PCB sheet
Belt cleaner release sensor PCB ASSY
Belt cleaner release case
<Bottom of case>
Confidential