High Voltage Power Supply Board - Kyocera PE-MF2 Service Manual

11. PSU [F] ( x 4)
• There are two types of PSUs for this model. Do not install a wrong PSU in the machine.
• PSU has yellow [a] on the transistor is for NA models and PSU has green [b] on the transistor is for
EU models.
Fuse
There is the removable fuse on the PSU.
Fuse No.
FU101: NA
FU101: EU, ASIA
• Use a correct rating fuse for the fuse replacement. Never use a wrong rating fuse. If do so, the machine
may be damaged.
• Never try direct connection of PSU circuit without a fuse.

High Voltage Power Supply Board

1. Remove all AIO cartridges.
1. Operation panel (* p.26)
2. Rear cover (* p.25)
3. Right cover (* p.27)
Rating
15 A, 125V
6.3A, 250V
Electrical Components
4
75