Table of Contents
Advertisement
CA Series PC/104
Windows OS
Older OS for CA Series
DOS
Moxa DOS API-232 is a software package that can help you develop or debug serial communications programs.
This section will explain how to install the package, set up the driver, and load or unload the driver. For
additional information about the API-232 library and utilities, please refer to Chapter 4.
The DOS drivers support the CA-104, CA-104-T, CA-132, CA-132-T, CA-132I, and CA-132I-T. The CA-108,
CA-114, and CA-134I models are not supported under DOS.
In the following instructions, the CA-104 is used as an example.
Installing the Driver
Run the installation program, DOSINST.EXE, in the DOS folder. Specify the target directory for the API-232
files (e.g., C:\MOXA). Press F2 to start the installation.
When the installation is completed, you will be prompted to set up the board and driver initial values. We
strongly recommendthat you do so.
3-2
Software Installation
Advertisement
Table of Contents
