3
Qualitative Data Analysis
Exercise 1. Display and manipulate chromatograms
Exercise 1. Display and manipulate chromatograms
In this exercise, you load chromatograms and change the chromatographic
display.
Steps
1 Display Data Analysis view.
2 Load the method
SULFA MS SCAN 1.M.
3 Display the Signal Toolset.
28
Detailed Instructions
• In the view selection area of the
ChemStation window, click Data
Analysis.
a Select File > Load > Method.
b Navigate to the folder
C:\CHEM32\1\METHODS.
c Select the method file and click OK.
• Click the Signal icon,
which is near the middle
of the window.
Agilent 6100 Series Quadrupole LC/MS Systems Familiarization Guide
Comments
• If you just completed the previous
exercise, that method is already
loaded.