Steps
3 Enter the sample information:
•
Operator name
•
Subdirectory: Sulfas
•
Prefix: Sulfa_scan
•
Location: Vial 1
•
Sample Name: Sulfas 10 ng/µ
•
Comment: Scan familiarization
exercise
Task 2. Acquire the data
Steps
1 Place the vial of sulfa sample you
prepared at 10 ng/µL into position 1
in the autosampler.
2 Inject the sulfa mix sample.
Agilent 6100 Series Quadrupole LC/MS Systems Familiarization Guide
Detailed Instructions
a Enter the parameters described in
step 3
and shown in the figure
below.
b Click OK.
L
Detailed Instructions
• Click the Single Sample button to
start the run.
Set Up and Run a Scan Method
Task 2. Acquire the data
Comments
• If you select Prefix/Counter, the
file names increment automatically
from one run to the next.
Comments
• You prepared this sample in
"Exercise 2. Prepare the samples
for the analyses"
on page 13.
This button is present only when you
have selected Single Sample mode
from the top toolbar.
2
25