Table of Contents
Advertisement
6
Quantitative Data Analysis
Task 2. Set up the signal for quantification
Steps
4 Set up the signal for quantification.
5 (Optional) Save the method under the
same name (CAFFEINE CAL.M).
64
Detailed Instructions
a Do one of the following:
•
Click the icon to Edit
current method signals.
•
Select Calibration >
Signal Details.
b From the list of Available Signals,
select MSD1 195, EIC=195.1:195.1.
c Click Add to Method.
d Click OK.
a Select File > Save > Method.
b In the box for Comment for method
history, type a comment.
c Click OK.
Agilent 6100 Series Quadrupole LC/MS Systems Familiarization Guide
Comments
• The EIC signal is available only
because you loaded the 195 EIC in
step
2.
• For these exercises, you save the
method frequently, but you could
wait instead until you had
established all the method settings.
Advertisement
Table of Contents
