2
Set Up and Run a Scan Method
Task 2. Enter MS acquisition parameters
Steps
3 Set up to store the fragmentor
voltage throughout the run.
4 Save the method.
22
Detailed Instructions
a Right-click the MSD
icon on the system
diagram and select
Data Curves.
b Select Fragmentor - 1.
c Click the Add button.
d Click OK.
a Select Method > Save Method to
overwrite the method
SULFA MS SCAN 1.M.
b In the box for Comment for method
history, type a comment.
c Click OK.
Agilent 6100 Series Quadrupole LC/MS Systems Familiarization Guide
Comments