Exercise 2. Acquire Data With The Full-Scan Method; Task 1. Enter Sample Information - Agilent Technologies 6100 Series Familiarization Manual

2 Set Up and Run a Scan Method

Exercise 2. Acquire data with the full-scan method

Exercise 2. Acquire data with the full-scan method
Now you are ready to acquire data for the sulfa mix with the method you just
created. This exercise consists of the following tasks:
•
•

Task 1. Enter sample information

Steps
1 Display the Single Sample toolbar.
2 Display the Sample Information
dialog box.
24
"Task 1. Enter sample information"
"Task 2. Acquire the data"
Detailed Instructions
• In the top toolbar, click
the single sample icon.
a Click Sample Info on the
RunControl menu.
Agilent 6100 Series Quadrupole LC/MS Systems Familiarization Guide
on page 24
on page 25
Comments