Set Up And Run A Sequence - Agilent Technologies 6100 Series Familiarization Manual

Agilent 6100 Series Quadrupole LC/MS System
Familiarization Guide
5

Set Up and Run a Sequence

Exercise 1. Set up a sequence
Task 1. Prepare to create a new sequence
Task 2. Edit sequence parameters
Task 3. Set up the sequence table
Task 4. Set up the sequence output
Exercise 2. Run the sequence
These exercises show you how to set up a sequence for the SIM analysis of the
demonstration sample (sulfa mix), and to acquire data with that sequence.
In the sequence, you run the sulfa mix at three concentrations: 1, 5 and 10
ng/μL. You also run a solvent blank.
Before you start
• Read the Agilent 6100 Series Quadrupole LC/MS Systems Quick Start
Guide and Chapter 3 of the Agilent 6100 Series Quadrupole LC/MS Systems
Concepts Guide.
• Complete the previous exercises in this manual.
For details about sequences, see the automation chapter in Agilent
ChemStation: Understanding Your ChemStation.
52
52
53
55
58
60
51