Set Up And Run A Scan Method - Agilent Technologies 6100 Series Familiarization Manual

Agilent 6100 Series Quadrupole LC/MS System
Familiarization Guide
2

Set Up and Run a Scan Method

Exercise 1. Set up a full-scan acquisition method
Task 1. Enter LC acquisition parameters
Task 2. Enter MS acquisition parameters
Exercise 2. Acquire data with the full-scan method
Task 1. Enter sample information
Task 2. Acquire the data
These exercises show you how to set up a scan data acquisition method for the
demonstration sample (sulfa mix) and to acquire data with that method.
The LC parameters that you enter in these exercises are appropriate for the
standard Agilent 1100/1200/1260/1290 Series liquid chromatography (LC)
systems. You must enter LC parameters that are appropriate for your LC
model.
To view the results of these exercises, see
Analysis."
Before you start
• Review the Agilent 6100 Series Quadrupole LC/MS Systems Quick Start
Guide and Chapter 3 of the Agilent 6100 Series Quadrupole LC/MS Systems
Concepts Guide.
• Prepare the LC, column and sample as described in
the Analysis."
For the tasks on the following pages, try the steps on the left without the
detailed instructions. If you need more help, follow the detailed instructions
on the right.
18
18
20
24
25
Chapter 3, "Qualitative Data
Chapter
24
1, "Prepare for
17