Quantitative Data Analysis - Agilent Technologies 6100 Series Familiarization Manual

Agilent 6100 Series Quadrupole LC/MS System
Familiarization Guide
6

Quantitative Data Analysis

Exercise 1. Create a method for quantification
Task 1. Create a new method
Task 2. Set up the signal for quantification
Task 3. Integrate the low-level standard
Task 4. Set general calibration parameters
Task 5. Set up the calibration curve
Task 6. Explore options to refine the calibration
Exercise 2. Process a sample and print a report
This chapter shows you how to use the ChemStation Data Analysis to perform
quantification. The exercises in this chapter illustrate a simple calibration that
uses data files that you received with your ChemStation software.
Before you start
• Read the Agilent 6100 Series Quadrupole LC/MS Systems Quick Start
Guide.
• Read the chapter on Data Analysis in the Agilent 6100 Series Quadrupole
LC/MS Systems Concepts Guide.
• Make sure that you have the caffeine data files on your ChemStation. Check
for the files under C:\CHEM32\1\DATA\MSDEMO. The file names are
CAFCAL0X.D, where x is a number from 1 to 5.
62
62
63
65
67
68
72
73
61