Table of Contents
Advertisement
3
Qualitative Data Analysis
Exercise 1. Display and manipulate chromatograms
Steps
5 Verify that you see the DAD and MS
chromatograms.
6 Change the chromatogram view so
that the MS and UV chromatograms
are overlaid in the display.
30
Detailed Instructions
a Check that you see a display that is
similar to the one shown below.
b Verify that you see the DAD signal
in the top chromatogram.
c Confirm that you see the MSD
signal in the bottom chromatogram.
a In the Signal Toolset near
the middle of the window,
click the icon to display
overlaid signals.
b Check that you see the overlaid
chromatograms, as shown below.
c Click the icon to display
separate signals.
Agilent 6100 Series Quadrupole LC/MS Systems Familiarization Guide
Comments
• The icon in
step a
is also
available in the Graphics
Toolset, but in that toolset
it toggles overlaid/separate. You
click the icon shown above to turn
on the display of the Graphics
Toolset.
Advertisement
Table of Contents
