6
Create a SIM Quantitation Method
Simultaneously Acquire Scan and SIM Data (SIM/Scan Mode)
96
If we start with a method containing Scan parameters and then
also enter SIM parameters like we did for the evalsim.m method,
our method already contains all parameters required except
one. We only need to check a box that specifies that we want to
acquire both types of data simultaneously.
In SIM/Scan mode the number of data points taken in each
mode is reduced and we will see how that impacts the total
cycle frequency.
Select the MS Parameters button,
1
Scan Parameters dialog box opens.
Mark the Acquire Scan and SIM data check box.
2
From the Acq. Mode dropdown box, select Scan.
3
Select Scan Parameters. The Edit Scan Parameters dialog box
4
opens and we can view our previous settings.
Agilent G1701EA MSD Productivity ChemStation Familiarization Guide
. The MS SIM /