Step 4. Set Up And Run An Acquisition Method - Agilent Technologies 6400 Series Quick Start Manual

Getting Started

Step 4. Set up and run an acquisition method

Step 4. Set up and run an acquisition method
Read and follow the instructions in the online Help for each of the tasks
described on the following pages.
Also, do Exercise 1 of the Data Acquisition Familiarization Guide to learn how to
set up and run an acquisition method.
1 Set up the method:
2 Enter values for all of the LC modules configured for the instrument.
Make sure when you type the MS parameters on the next page that the tune file is the one
NO T E
that you want to use with the acquisition.
20
a Type the values and settings for each of the tabs below.
b Optional. If you want to download the settings to the instrument, click
Apply.
c To save the method, click Method > Save As.
d Name the method and click OK.
Agilent 6400 Series Triple Quadrupole LC/MS Quick Start Guide