Backup And Restore - Intelligent Lighting Controls, Inc. LightLEEDer Operation Manual

Programming
Test Input Devices
This tool is for verifying that all of the lightsync devices are communi-
cating and working properly. When testing, all programmed com-
mands are ignored. every input pushed or activated, will activate the
associated status leD for each button. note: This test will run for 4
hours without manually exiting. Devices must be con gured prior to
test. see section 3.5
1. From the home screen, press
connect to the Network Controller Node 00 as shown in
Section 3.0)
2. Press until sPeCIAl FUnCTIOns appears
3. Press sPeCIAl FUnCTIOns
4. Press FIRMWARe ReVIsIOns
5. Press and hold and
6. Press 7 times
7. Press DIAgnOsTICs
8. Press TesT InPUT DeVICes
9. Press sTOP to end the test
10. Press hOMe to exit

3.9.5 Backup and Restore

This gives the programmer an area to backup the system data. It
also provides a way to compare data, and restore data.
1. From the home screen, press
connect to the Network Controller Node 00 as shown in
Section 3.0)
2. Press until sPeCIAl FUnCTIOns appears
3. Press sPeCIAl FUnCTIOns
4. Press FIRMWARe ReVIsIOns
5. Press and hold and
6. Press 7 times
7. Press DIAgnOsTICs
8. Press BACKUP/ResTORe DATA
ILC LightLEEDer Operation Manual
Version 1C 3/14/17
eDIT (Networked Panels
buttons to enter a hidden menu
eDIT (Networked Panels
buttons to enter a hidden menu
Test Input Devices
CLEAR TIMERS
CLEAR TIMER/RLY MAP
CLEAR PRESETS
DIAGNOSTICS
From the hidden menu,
press DIAgnOsTICs
CYCLE TEST RELAYS
FIND DEVICES
TEST INPUT DEVICES
BACKUP/RESTORE DATA
Press TesT InPUT DeVICes
Backup and Restore
CLEAR TIMERS
CLEAR TIMER/RLY MAP
CLEAR PRESETS
DIAGNOSTICS
From the hidden menu,
press DIAgnOsTICs
CYCLE TEST RELAYS
FIND DEVICES
TEST INPUT DEVICES
BACKUP/RESTORE DATA
Press BACKUP/ResTORe DATA
BACKUP ALL DATA
RESTORE ALL DATA
COMPARE ALL DATA
Press BACKUP All DATA,
ResTORe All DATA, or
COMPARe All DATA