Intelligent Lighting Controls, Inc. LightLEEDer Operation Manual page 54

Programming
Relay Name:
Note: It is suggested that the panel node number and relay be included in
the naming of the relay.
Example: 04:03 Exterior = panel node 4, relay 3, Exterior
1. From the home screen, press
connect to the Network Controller Node 00 as shown in
Section 3.0)
2. Press until sPeCIAl FUnCTIOns appears
3. Press sPeCIAl FUnCTIOns
4. Press eDIT nAMes
5. Press eDIT RelAY nAMes
6. Press eDIT
7. Press or to change to the desired relay
8. Press or to scroll to the space to edit
9. Press or to change to the desired letter,
number, or character.
10. Press or to scroll to the next space to edit
11. Continue until all characters have been edited
12. Press sAVe to store the programming
13. Press hOMe
Group Names:
Note: It is suggested that the group number be included in
the naming of the group.
1. From the home screen, press
connect to the Network Controller Node 00 as shown in
Section 3.0)
2. Press until sPeCIAl FUnCTIOns appears
3. Press sPeCIAl FUnCTIOns
4. Press eDIT nAMes
5. Press eDIT gROUP nAMes
6. Press eDIT
7. Press or to change to the desired group
8. Press or to scroll to the space to edit
9. Press or to change to the desired letter,
number, or character.
10. Press or to scroll to the next space to edit
11. Continue until all characters have been edited
12. Press sAVe to store the programming
13. Press hOMe
ILC LightLEEDer Operation Manual
Version 1C 3/14/17
eDIT (Networked Panels
eDIT (Networked Panels
Naming Relays
EDIT NAMES
CHANGE PASSWORDS
FIRMWARE REVISION
From the sPeCIAl FUnCTIOns
screen press eDIT nAMes
EDIT PANEL NAME
EDIT RELAY NAMES
EDIT GROUP NAMES
EDIT TIMER NAMES
Press eDIT RelAY nAMes
RELAY 01 NAME
RLY:01.01
EDIT
Press eDIT
DEFAULT
RLY:01.01
^
SAVE
Press or then scroll
to the desired character
Naming Groups
EDIT PANEL NAME
EDIT RELAY NAMES
EDIT GROUP NAMES
EDIT TIMER NAMES
From the sPeCIAl FUnCTIOns screen,
press eDIT gROUP nAMes
GROUP O01 NAME
GROUP.001
EDIT
Press eDIT
DEFAULT
GROUP.001
^
SAVE
Press or then scroll
to the desired character