Clearing Specific Parts Of Memory - Intelligent Lighting Controls, Inc. LightLEEDer Operation Manual

Programming

3.3.2 Clearing Specific Parts of Memory

Programming can be cleared for speci c con guration or mapping
areas programmed into memory. some can be done in the network
Controller, which is network-wide, while others can only be done at
the panel level.
1. From the home screen, press
connect to the Network Controller Node 00 as shown in
Section 3.0)
2. scroll until sPeCIAl FUnCTIOns appears
3. Press to select sPeCIAl FUnCTIOns
4. Press and select FIRMWARe ReVIsIOn
5. From this screen press
enter a hidden menu
6. Press to scroll to desired function
7. Press and select
a) CleAR In/RlY MAP: Clears all input to relay mapping. (Individ-
ual panels only)
b) CleAR In/gRP MAP: Clears all input to group mapping.
c) CleAR gROUPs: Clears all group con gurations. (Individual
panels only)
d) CleAR TIMeRs: Clears all timers con gurations.
e) CleAR TMR/gRP: Clears all timers to groups. (network
Controller only)
f) CleAR TMR/RlY MAP: Clears all timers to relay mapping.
(Individual panels only)
g) CleAR PReseTs: Clears all presets con gurations. (Individual
panels only)
8. You will be prompted to clear selected?
9. Press Yes and the memory will be cleared of all programming
ILC LightLEEDer Operation Manual
Version 1C 3/14/17
eDIT (Networked Panels
and buttons at the same time to
Clearing Specific Parts of Memory
ILC LIGHTLEEDER
TUE 01/21/11.
09:46:54
EDIT NODE
Press eDIT, scroll down until
sPeCIAl FUnCTIOns appears
PRESETS
OTHER DEVICES
REMOTE PANEL
SPECIAL FUNCTIONS
Press sPeCIAl FUnCTIOns
EDIT NAMES
CHANGE PASSWORDS
FIRMWARE REVISION
Press FIRMWARe ReVIsIOn
DEMO CLOCK: OFF
RTC SOURCE: CRYS
NETWORK: ENABLED
CLEAR ALL MEMORY
scroll to Desired Function, Press
CLEAR SELECTED?
NO
YES
Press Yes
PM.
01.