2/ System Specifications; Component Main Data; Environmental Conditions; Table 2: Component Main Data - Kontron COM-HPC User Manual

2/ System specifications

2.1. Component Main Data

The table below summarizes the features of the motherboard.

Table 2: Component Main Data

COM-HPC Client Evaluation Carrier (ADHC) Size D and E
Dimensions
Ethernet
PCI Express®
USB
Serial
Visual Control BIOS
Post-Code
Onboard Header
Various
Power Supply
Danger of explosion if the lithium battery is incorrectly replaced.

2.2. Environmental Conditions

Table 3: Environmental Conditions

Operating
Storage
Theoretical MTBF
Compliance
www.kontron.com
305 mm x 330 mm (E-ATX)
1x RJ45 – max. 10G-BASE-T, 8x SFP28 cages via 2x Intel C827-IM
1x PCIe Gen4 x16 slot (PCIe Lane Group 1), 4x PCIe Gen4 x8 to 4x PCIe card slots (PCIe Lane
Group 2 and 3), 2x PCIe Gen4 x4 to 2x PCIe card slots (PCIe Lane Group 0 Low), 2x PCIe Gen3
x4 to 2x M.2 2242/2280 slots (PCIe Lane Group 0 High)
4x USB 3.2 Gen 2x1
2x DSUB9 - COM ports (RX/TX)
4x 7-segment display, Various LEDs
2x SATA, 1x I2C, 1x eSPI, 1x SMBus, 1x GPIO, 1x Fan, 1x Feature Connector
BIOS flash-socket, Battery holder
ATX power supply 24 + 8 pin
• Replace only with the same or equivalent type recommended by the manufacturer
• Dispose of used batteries according to the manufacturer's instructions
-0°C to +60°C
Some connectors and supercap has operating temperature only 0°C to +70°C, relative
humidity (non-condensing) 10 % to 93 % at 40°C
-30°C to +85°C
relative humidity (non-condensing) 10 % to 93 % at 40°C
not applicable
CE/UKCA, RoHS II, WEEE
COM-HPC Client Evaluation Carrier- Rev. 0.3 Preliminary
// 15