2/ System Specifications; Main Features; Environmental Conditions; Table 1: Main Features - Kontron COM-HPC User Manual

2/ System specifications

Main Features

The table below summarizes the features of the evaluation carrier.

Table 1: Main Features

COM-HPC Server Evaluation Carrier
Dimensions
Ethernet
PCI Express®
USB
Serial
BMC
Visual Control
BIOS Post-Code
Onboard Header
Various
Power Supply
Danger of explosion if the lithium battery is replaced incorrectly.

Environmental Conditions

Table 2: Environmental Conditions

Operating
Storage
Theoretical MTBF
Compliance
www.kontron.com
305 mm x 330 mm (E-ATX)
1x RJ45 max. 10GBASE-T, 8x SFP28 cages via 2x Intel PHY C827-IM
2x PCIe Gen4 x4 to 2x PCIe card slots (PCIe Lane Group 0 Low)
2x PCIe Gen3 x4 to 2x M.2 2242/2280 slots (PCIe Lane Group 0 High)
1x PCIe Gen4 x16 slot (PCIe Lane Group 1)
4x PCIe Gen4 x8 to 4x PCIe card slots (PCIe Lane Group 2 and 3)
4x USB 3.2 Gen 2x1
2x DSUB9 - COM ports (RX/TX)
1x Slot for optional BMC card
2x 7-segment display,
Various LEDs
2x SATA, 1x I2C, 1x eSPI, 1x SMBus, 1x GPIO, 1x Fan, 1x Feature Connector
BIOS flash-socket, Battery holder
ATX power supply 24 + 8 pin
Replace only with the same or equivalent type recommended by the manufacturer


-0°C to +60°C
Some connectors and supercap has operating temperature only 0°C to +70°C, relative
humidity (non-condensing) 10 % to 93 % at 40°C
-30°C to +85°C
relative humidity (non-condensing) 10 % to 93 % at 40°C
not applicable
CE/UKCA, RoHS II, WEEE
COM-HPC Server Evaluation Carrier
- Rev. 1.0
// 15