Wizard - Quick Start Via Pdm - Siemens SITRANS F series Operating Instructions Manual

3. Launch SIMATIC Manager and create a new project for the device.
4. After the reset is complete upload parameters to the PC/PG.
5. Configure the device via the Wizard Quick Start.
C.1.7

Wizard - Quick Start via PDM

The graphic Quick Start Wizard provides an easy multistep procedure that configures the
device for a simple application.
Please consult the SIMATIC PDM operating instructions or online help for details on using
SIMATIC PDM.
Quick start
Note
• The Quick Start wizard settings are inter-related and changes apply only after you click
on Apply at the end of the wizard to transfer settings to the device.
• Do not use the Quick Start Wizard to modify individual parameters.
• Click on Back to return and revise settings or Cancel to exit the Quick Start.
Launch SIMATIC PDM, open the menu Device – Wizard - Quick Start, and follow the steps.
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC
SIMATIC PDM
C.1 Commissioning with PDM
347