Siemens SITRANS F series Operating Instructions Manual page 113

ID/ Diagnostic
Icons
277 LiquIdent
278 LiquIdent
279 LiquIdent
289 Sound velocity
290 Flow velocity
291 Pressure
292 Kinematic viscosity
293 Auxiliary temperature
294 Sensor temperature
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC
Action
Value above warning limit. Check process
conditions or align limit to normal operation.
Adjust parameter "Upper warning limit"
Value below warning limit. Check process
conditions or align limit to normal operation.
Adjust parameter "Lower warning limit"
Value below alarm limit. Check process condi-
tions or align limit to normal operation. Adjust
parameter "Lower alarm limit"
Value simulated. Disable 'Simulation' to return
to normal operation.
Value simulated. Disable 'Simulation' to return
to normal operation.
Value simulated. Disable 'Simulation' to return
to normal operation.
Value simulated. Disable 'Simulation' to return
to normal operation.
Value simulated. Disable 'Simulation' to return
to normal operation.
Value simulated. Disable 'Simulation' to return
to normal operation.
Diagnosing and troubleshooting
9.4 Fault codes and corrective actions
Comment
Only hydrocarbon
Only hydrocarbon
Only hydrocarbon
Only hydrocarbon and water
Only hydrocarbon and water
Only hydrocarbon and water
Only hydrocarbon and water
Only hydrocarbon and water
Only hydrocarbon and water
111