Changing Parameter Settings Using Simatic Pdm; Parameters Accessed Via Drop-Down Menus - Siemens SITRANS F series Operating Instructions Manual

C.1.10

Changing parameter settings using SIMATIC PDM

Note
For a complete list of parameters, see the Function Manual.
Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters NOT being updated.
Many parameters are accessed via the online menus in PDM, see Parameters accessed via
drop-down menus for the others.
1. Launch SIMATIC PDM, connect to the appropriate device and upload data.
2. Adjust parameter values in the parameter value field then click on Enter. The status fields
read Changed.
3. Open the Device menu, click on Download to device, then use File → Save to save
settings offline. The status fields are cleared.
C.1.11

Parameters accessed via drop-down menus

Click on Device, View or Diagnostics to open the associated drop-down menus.
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC
SIMATIC PDM
C.1 Commissioning with PDM
349