Commissioning; Basic Safety Notes; Opening Device In Energized State - Siemens SITRANS F series Operating Instructions Manual

Commissioning

This chapter gives instructions to commissioning your device, see Commissioning via local
display (Page 54).
Furthermore, the device can be commissioned using SIMATIC PDM, see Commissioning
with PDM (Page 343).
6.1

Basic safety notes

Loss of type of protection
Damage to device if the enclosure is open or not properly closed. The type of protection
specified on the nameplate or in Technical data (Page 115) is no longer guaranteed.
• Make sure that the device is securely closed.
6.1.1

Opening device in energized state

Opening device in energized state
Risk of explosion in hazardous areas. May cause death or serious injury.
• Only open the device in a de-energized state.
• Check prior to commissioning that the cover, cover locks, and cable inlets are
Exception: Devices having the type of protection "Intrinsic safety Ex i" may also be opened
in energized state in hazardous areas.
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC
CAUTION
WARNING
assembled in accordance with the directives.
6
51