Siemens SITRANS F series Operating Instructions Manual page 103

ID/ Diagnostic
Icons
170 Loop current
172 Transmitter
173 Sensor
174 Display
175 IO
176 Sensor
177 Device is starting
178 Transmitter
179 Alarm class
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC
Action
Loop current simulated. Disable 'Simulation'
before returning to normal operation
FW invalid. A component does not have the
expected FW version. Start a product firmware
update to update the component version or
replace the component.
FW invalid. A component does not have the
expected FW version. Start a product firmware
update to update the component version or
replace the component.
FW invalid. A component does not have the
expected FW version. Start a product firmware
update to update the component version or
replace the component.
FW invalid. A component does not have the
expected FW version. Start a product firmware
update to update the component version or
replace the component.
Sensor type incompatible. Please replace
sensor.
Please wait until startup is finished. Startup
time see manual.
FW invalid. A component does not have the
expected FW version. Start a product firmware
update to update the component version.
Alarm class simulated. Disable Simulation
before returning to normal operation.
Diagnosing and troubleshooting
9.4 Fault codes and corrective actions
Comment
Only HART devices
No detailed information avail-
able in view Active diagnostic
events. Icon depends on
simulated alarm class resp.
NAMUR status signal and the
priority in case of multiple
alarm classes simulated.
101