Simulation; Inputs And Outputs; A.9.10 Simulation - Siemens SITRANS F series Operating Instructions Manual

Modbus communication
A.9 Modbus holding registers tables
Modbus Data type /
register Size in bytes
11402 Unsigned / 4
11404 Unsigned / 2
11405 Unsigned / 2
...
11493 Unsigned / 2
A.9.10

Simulation

A.9.10.1

Inputs and outputs

Channel 2 output current
Table A- 118 Channel 2 output current
Modbus Data type /
register Size in bytes
8825 Unsigned / 2
8826 Float / 4
322
Parameter Description
Logging interval Defines interval for
logging. Granularity is
10 ms.
Register 1 Modbus register that
defines the parameter
to be logged. Only
parameter of type float
or unsigned can be
logged.
65535: No logging
Register 2 Modbus register that
defines the parameter
to be logged. Only
parameter of type float
or unsigned can be
logged.
65535: No logging
Register 90 Modbus register that
defines the parameter
to be logged. Only
parameter of type float
or unsigned can be
logged.
65535: No logging
Parameter Description
Simulation Enables or disables
simulation of channel 2
output current.
Simulated value Current value that is
output on the channel
when simulation is
enabled.
Default value Value range /
[unit] Setting options
(unit register)
500 1 - 8640000
[x 10 ms]
65535 -
65535 -
65535 -
Default value Value range /
[unit] Setting options
(unit register)
0
0: Disabled
•
1: Enabled
•
0 0 - 25
[mA]
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC
Access
level
Read /
write
Read /
write
Read /
write
Read /
write
Access
level
Read /
write
Read /
write