Introduction; Purpose Of This Documentation; Product Compatibility; Connecting - Siemens SITRANS F series Operating Instructions Manual

Introduction

Note
This manual applies to the SITRANS FST030 transmitter Modbus version only. Modbus
registered trademark of MODICON, Inc.
Use the device to measure process medium in accordance with the information in the
Operating Instructions.
Note
Use in a domestic environment
This Class A Group 1 equipment is intended for use in industrial areas.
In a domestic environment this device may cause radio interference.
In order to operate an ultrasonic flow meter, you need both the transmitter Operating
Instructions and the sensor Installation Manual, see Flow documentation
(https://support.industry.siemens.com/cs/products?pnid=17317&lc=en-WW).
1.1

Purpose of this documentation

These instructions contain all information required to commission and use the device. Read
the instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
1.2

Product compatibility

Manual Remarks
edition
08/2017 New features
02/2017 First edition
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC
Device revision
Modbus
FW: 1.00.00 or later
HW: 02 or later
Modbus
FW: 1.00.00
Compatible version of device integration package
SIMATIC PDM V8.2
AMS Device Manager 12.0
SITRANS DTM V4.1
Field communicator V3.8
SIMATIC PDM V8.2
AMS Device Manager 12.0
1
®
1.00.00 or later
1.00.00 or later
1.00.00 or later
1.00.00 or later
1.00.00 or later
1.00.00 or later
is a
9