Siemens SITRANS F series Operating Instructions Manual page 61

Wall sound velocity
Pipe expansion
Liner
Liner material
Liner settings
Disturbed flow
Inner pipe roughness
*
Figure 6-2
Text
Sensor settings
Sensor settings
Sensor size
Sensor selection
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC
Enter the wall sound velocity of the material. Only available if custom
material is selected.
Define the pipe expansion coefficients for pressure and temperature
induced pipe expansion
Select "Yes" to configure the liner material.
Select "No" to only configure the Inner pipe roughness.
Select the liner material.
Set the liner sound velocity and thickness.
Define the type of pipe configuration and the distance to the sensor.
Set the inner pipe roughness.
Select "Custom" to enter non-standard values.
Only for Expert
1)
Options/Description
Select "Yes" to configure the sensors.
Select the sensor type installed (found on sensor label).
Select the sensor size from the options list (found on sensor label).
Define the temperature compensation mode, the temperature class, the
spacing offset and the cable length
Commissioning
6.6 Commissioning via local display
59