Table of Contents
Advertisement
Commissioning
6.9 Wizard - Quick Start via PDM
1. Check that you have the most recent EDD, and if necessary update it, see Updating the
Electronic Device Description (EDD) in Initial setup (Page 52).
2. Launch SIMATIC Manager.
3. Right-click on SITRANS FC410 and select Open Object to open SIMATIC PDM.
4. Click on Device and select Upload to PG/PC Wizard... to configure the device.
See also
Wizard - Quick Start via PDM (Page 56)
6.9
Wizard - Quick Start via PDM
The graphic Quick Start Wizard provides an easy 5-step procedure that configures the
device for a simple application.
Please consult the SIMATIC PDM operating instructions or online help for details on using
SIMATIC PDM.
Access level control
The parameters are protected against changes by access level control. To gain access,
select Access Management from the device menu, select User and enter the PIN code.
The default user PIN code is 2457.
Quick start
Note
- The Quick Start wizard settings are inter-related and changes apply only after you click on
Apply and Transfer at the end of step 5 to save settings offline and transfer them to the
device.
- Do not use the Quick Start Wizard to modify individual parameters.
- Click on Back to return and revise settings or Cancel to exit the Quick Start.
Launch SIMATIC PDM, open the menu Device → Wizard - Quick Start..., and follow steps 1
to 5.
56
Operating Instructions, 02/2016, A5E33120874-AC
FC410 with Modbus
Advertisement
Table of Contents
