Quick Start Wizard Via Simatic Pdm; Device Description (Dd) - Siemens SITRANS LR250 Instruction Manual

Quick Start Wizard via SIMATIC PDM

The graphical Quick Start Wizard groups together all the settings you need to make for a
simple application into 4 steps.
To use HART or PROFIBUS PA, you will need a PC configuration tool: we recommend
SIMATIC PDM.
Please consult the operating instructions or online help for details on using SIMATIC
PDM. (Application Guides for setting up Siemens HART and PROFIBUS PA instruments
with SIMATIC PDM are available on our website: www.siemens.com/
processautomation.)

Device Description (DD)

You will need the DD for SIMATIC PDM version 6.0 with SP2. You can locate the DD in
Device Catalog, under Sensors/Level/Echo/Siemens Milltronics/SITRANS LR250. If you do
not see SITRANS LR250 under Siemens Milltronics, you can download the DD from the
product page of our website at: https://pia.khe.siemens.com/index.asp?Nr=7427, under
Downloads.
Save the files to your computer, and extract the zipped file to an easily accessed location.
Launch SIMATIC PDM – Manager Device Catalog, browse to the unzipped DD file and
select it.
Configuring a new device
1. Set Address (default for PROFIBUS PA is 126; for HART is 0).
• Press Right ARROW
• Press Down ARROW
item 5).
• Press Right ARROW
• Scroll to DEVICE ADDRESS and press Right ARROW
view.
• If required, Press Right ARROW
press Right ARROW
parameter view.
• Press Mode
2. You will need the most up-to-date Device Description (DD) for your instrument.
Launch SIMATIC PDM – Manager Device Catalog, browse to the unzipped DD file
and select it.
3. Launch SIMATIC Manager and create a new project for LR250. Application Guides
for setting up HART and PROFIBUS PA devices with SIMATIC PDM.can be
downloaded from the product page of our website at:
https://pia.khe.siemens.com/index.asp?Nr=7427
4. Open the menu Device – Reset and click on Factory Reset.
5. Upload parameters to the PC/PG.
6. Calibrate the device via the Quick Start Wizard.
Page 38 SITRANS LR250 (HART) – INSTRUCTION MANUAL
to activate PROGRAM mode and open menu level 1.
repeatedly to navigate to COMMUNICATION (menu
to display the parameter list.
to open Edit mode. Key in a new value and
to accept it. The LCD displays the new value in
to exit PROGRAM mode
to open parameter
7ML1998JE01