Fw Update Change Log; Device Reset - Siemens SITRANS F series Operating Instructions Manual

A.9.11.3

FW update change log

Table A- 138 FW update change log
Modbus Data type /
register Size in bytes
6900 Unsigned / 2
6981 Unsigned / 2
6919 String / 16
6927 String / 16
6952 Unsigned / 2
6953 Unsigned / 2
A.9.12

Device reset

Table A- 139 Device reset
Modbus Data type /
register Size in bytes
700 Unsigned / 2
6000 Unsigned / 2
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC
Parameter Description
Newest entry Entry number of new-
number est entry. Older entries
have a smaller entry
number.
(Wrap around for 0 -
100).
Entry number Selection of the entry
number.
Time stamp Time stamp of the
parameter change log
entry specified by Entry
number.
Format is YYYY-MM-
DD hh-mm.
Version Version string specified
by Entry number.
Available en- Current number of
tries available firmware
updates log entries.
Clear parame- Command to clear the
ter change log parameter change log.
Parameter Description
Set to default Command to set all
changeable parame-
ters to their defined
values.
Restart device Command to restart
device.
A.9 Modbus holding registers tables
Default value Value range /
[unit] Setting options
(unit register)
- -
- 0 - 20
- -
- -
- -
-
1: Clear log
•
Default value Value range /
[unit] Setting options
(unit register)
0
1: Reset parameters
•
-
1: Restart device
•
Modbus communication
Access
level
Read
only
Read /
write
Read
only
Read
only
Read
only
Write
only
(Expert)
Access
level
Write
only
Write
only
335