Approvals - Siemens SITRANS F series Operating Instructions Manual

Table 10- 15 Process medium conditions
Description
Process medium temperature (T
Process medium density (min to max)
Process medium gauge pressure (min to max)
Process medium absolute pressure (min to max)
Process medium viscosity
10.7

Approvals

Note
Always refer to nameplates on the device for device-specific approvals.
10.8 Approvals
Table 10- 16 Approvals
Description
ATEX
IECEx
FM
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC
) (min to max)
s
Specification
The transmitter (can be installed in Zone 2 for gas and Zone 22
•
for dust):
Certificate FM 17ATEXyyyyX:
II 3(1) GD
Ex ec ia [ia Ga] IIC T5 Gc
Ex tc [ia Da] IIIC T85°C Dc
The transmitter (can be installed in Zone 22 for dust):
•
Certificate: IECEx FM 16.yyyyX
Ex ec ia [ia Ga] IIC T5 Gc
Ex tc [ia Da] IIIC T85°C Dc
Transmitter and sensor:
•
– Class I Division 2 Groups A,B,C,D T5
– Class II Division 2 Groups E,F,G
– Class III Division 2
– Class I Zone 2 and Zone 22
*: See Control drawing: A5E32778336A
Technical data
10.7 Approvals
Specification
-50 to +200 °C (-58 to 492 °F)
1 to 5000 kg/m (0.06 to 312 lb/ft
3
0 to 160 bar (0 to 2321 psi)
Stainless steel: 1 to 101 bar (14.5
to 1465 psi)
Hastelloy: 1 to 161 bar (14.5 to
2335 psi)
Gases and non-compressible
liquids
)
3
121