Wizard - Clamp-On Configuration; Wizard - Zero Point Adjustment - Siemens SITRANS F series Operating Instructions Manual

SIMATIC PDM
C.1 Commissioning with PDM
C.1.8

Wizard - Clamp-On Configuration

Open the menu Device→Wizard→Clamp-On Configuration, and follow the steps.
The clamp-on configuration wizard takes the user through the necessary steps to install the
sensors to achieve proper operation.
C.1.9

Wizard - Zero point adjustment

Open the menu Device → Wizard → Inline Configuration, and follow the steps.
Although the device zero is very stable from the factory the user has the ability to remove
any residual zero offset that may exist by performing the Zero Point Adjustment wizard.
348
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
Operating Instructions, 08/2017, A5E37367739-AC