Table of Contents
Advertisement
5
RF Specifications
Appropriate antenna type and design should be used with matched antenna parameters according to
specific application. It is required to perform a comprehensive functional test for the RF design before
mass production of terminal products. The entire content of this chapter is provided for illustration only.
Analysis, evaluation and determination are still necessary when designing target products.
5.1. Cellular Network
5.1.1. Antenna Interfaces & Frequency Bands
The pin definition is shown below:
Table 36: Pin Definition of Cellular Network Interfaces of SG560D-CN
Pin Name
Pin No.
ANT0
211
ANT1
244
ANT2
256
ANT3
292
Table 37: Pin Definition of Cellular Network Interfaces of SG560D-EU
Pin Name
Pin No.
ANT0
211
SG560D_Series_Hardware_Design
I/O
Description
5G NR (n1/n3/n5/n8/n28 TRX, n41/n78/n79 TRX1) &
AIO
LTE LMHB TRX, WCDMA B1/B5/B8 TRX
5G NR (n1/n41/n78/n79 DRX MIMO) & LTE (B1/B41
AI
DRX MIMO)
5G NR (n1/n3/n5/n8/n28/n41/n78/n79 DRX) & LTE
AI
(LB/MB/HB DRX), WCDMA B1/B5/B8 DRX
5G NR (n1 PRX MIMO, n41/n78/n79 TRX0) & LTE
AIO
(B1/B41PRX MIMO)
I/O
Description
NR LMHB TRX0 + n77/n78 TRX0
LTE LMHB TRX0 + B42 TRX0
AIO
WCDMA B1/B5/B8 TRX
GSM900/DCS1800 TRX
Smart Module Series
90 / 134
Advertisement
Table of Contents
