Commissioning And Diagnostics On Profinet Io - Siemens SIMATIC ET 200S Manual

6.2

Commissioning and diagnostics on PROFINET IO

Chapter overview
Chapter
6.2.1
6.2.2
6.2.3
6.2.4
6.2.5
6.2.6
6.2.1 Configuring the ET 200S on PROFINET IO
Introduction
The IM151-3 PN interface module must have the device name assigned (see
Section 5.6).
Configuration is the configuration and parameter setting of the ET 200S.
• Configuring: The systematic arrangement of the different ET 200S modules
(setup)
• Configuration: setting the ET 200S parameters using the configuration software
Note
The ET 200S is included in the hardware catalog of HWCONFIG:
IM151-3 PN: as of STEP 7 V5.3 and Service Pack 1
•
The STEP 7 online help provides more detailed information on how to proceed.
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Configuring the ET 200S on PROFINET IO
Commissioning and startup of the ET 200S on PROFINET IO
Diagnostics with LED display
Diagnostic messages of the electronic modules
Evaluating the interrupts of the ET 200S
Diagnostics with STEP 7
Commissioning and Diagnostics
Description Page
6-57
6-59
6-61
6-64
6-65
6-66
6-57