Siemens SIMATIC ET 200S Manual page 72

Configuration Options
Table 3-3 Interface modules and the applications for which they are suited
•
Connecting the PROFIBUS DP by means of the
RS 485 interface
•
Use of fail-safe modules
•
Clocking as of 1.5 Mbps
•
Direct Data Exchange
•
The firmware can be updated via PROFIBUS DP
using HWCONFIG.
•
Operation as a DPV0 slave.
-- Acyclic data exchange (read/write data record):
class 2 services
•
Operation as a DPV1 slave.
-- Acyclic data exchange (read/write data record):
-- Diagnostics Interrupts
-- Process Alarms
-- Removal/Insertion Interrupt
•
Bus length of the ET 200S: max. 1 m (164 ft)
•
Number of modules: max. 63
•
Connecting the PROFINET
•
Operation as I/O device
-- Start data records
-- Output data with provider status of the
I/O controller
-- Input data with provider status of the
I/O device
-- Diagnostics Interrupts
-- Process Alarms
-- Removal/Insertion Interrupt
•
Bus length of the ET 200S: max. 2 m (164 ft)
•
Number of modules: max. 63
•
Status byte for power modules
3-8
Applications
Transmission rates:
9.6; 19.2; 45.45; 93.75;
187.5; 500 kbps,
1.5 ; 3; 6; 12 Mbps
Transmission rate:
100 Mbps
Autosensing
Interface module
IM151-1 HIGH
FEATURE
IM151-3 PN
ET 200S Distributed I/O System
EWA-4NEB 780602402-12