Commissioning The Et 200Sp For Profinet Io; Et 200Sp Cpu As An Io Controller - Siemens Simantic ET200SP System Manual

10.2

Commissioning the ET 200SP for PROFINET IO

Requirements
● The CPU/interface module is in the "Factory settings" status or has been reset to factory
settings (see section Interface module
(http://support.automation.siemens.com/WW/view/en/55683316/133300)).
● For CPU: The SIMATIC memory card is as delivered or has been formatted.
10.2.1

ET 200SP CPU as an IO controller

Configuration example
To use the ET 200SP distributed I/O system as an IO controller, you require the
CPU 151xSP-1 PN.
Figure 10-1
Distributed I/O system
System Manual, 12/2016, A5E03576849-AG
ET 200SP CPU as an IO controller
10.2 Commissioning the ET 200SP for PROFINET IO
Commissioning
199