Wiring Terminal Modules For Electronic Modules - Siemens SIMATIC ET 200S Manual

Wiring terminal modules for digital, analog, and process-related modules
The terminal assignment of the terminal module depends on which electronic
module is inserted. You will find information on this in the following chapters:
• Terminal modules in Chapter 9
• Digital electronic modules in Chapter 11
• Analog electronic modules in Chapter 12
• Process-related modules: See the process-related functions manual
TM-E15S26-A1 and electronic
module/process-related
module
Channel 0
CH0
Channel 0/2
CH0/2
1 5
2 6
3 7
4 8
A A
4 8
A A
3 7
AUX1 bus (PE) fed through. Connection to
terminals A4, A8 and A3, A7.
TM-E15S23-01 and
electronic module/process-related
module
Channel 0
CH0 CH0
Channel 0/2
CH0/2
1 5
2 6
3 7
4 8
AUX1 bus (PE) fed through. No
connection to terminals 4 and 8.
Figure 5-8

Wiring terminal modules for electronic modules

ET 200S Distributed I/O System
EWA-4NEB 780602402-12
TM-E15S24-A1 and
electronic module
Channel 0
Channel 1
CH0
CH1
Channel 0/2
Channel 1/3
CH0/2
CH1/3
AUX1 bus (PE) fed through.
Connection to terminals A4 and A8.
Channel 1 Channel 1
CH1
Channel 1/3
CH1/3
Channel 1 Channel 0
CH1
Channel 1/3 Channel 0/2
CH1/3
1 5
2 6
3 7
A A
4 8
TM-E15S24-AT and
2AI TC HF
Channel 0
CH0
1
2
AUX1 bus (PE) fed through. No connection
to the terminals of the terminal module.
Wiring and Fitting
TM-E15S23-01 and
electronic module
Channel 1
CH0 CH1
Channel 1/3
CH1/3
CH0/2
1 5
2 6
3 7
AUX1 bus fed through.
No connection to the
terminals.
Channel 1
CH1
5
6
5-15