Terminal Assignment Of The Tm-E15S24-01, Tm-E15C24-01 And Tm-E15N24-01 Terminal Module - Siemens SIMATIC ET 200S Manual

Terminal Module
9.8 TM-E15S24-01, TM-E15C24-01 and TM-E15N24-01
terminal module; (6ES7 193-4CBx0-0AA0)
Order number
6ES7 193-4CB20-0AA0 (screw-type terminal)
6ES7 193-4CB30-0AA0 (spring terminal)
6ES7 193-4CB70-0AA0 (Fast Connect)
Properties
• Terminal modules for electronic modules
• Connection via screw-type terminal with TM-P15S24-01
• Connection via spring terminal with TM-P15C24-01
• Connection with Fast Connect with TM-P15N24-01
• 2 x 4 terminals
• Basic wiring of the terminal module
• Build-as-you-go interference conductor from electronics module to standard
mounting rail over spring contact
• Inserting a shield connection element
• Traversing AUX1 rail without connection to terminals 4 and 8
Terminal assignment
See the following table for the terminal assignment of the terminal module:
Table 9-9
9-22
Terminal assignment of the TM-E15S24-01, TM-E15C24-01 and
TM-E15N24-01 terminal module
View
1 The assignment depends on the inserted electronic
2
3 Terminals that are not used by the electronic module
4
1 1 5 5
5
2 2 6 6
6
3 3 7 7
7
4 4 8 8
8
Terminal
module module
No access to AUX1 rail.
can be used for attaching terminal wires that are not can be used for attaching terminal wires that are not
required. This means that the approved potential
corresponds to the potential of the electronic module in corresponds to the potential of the electronic module in
use.
Name
ET 200S Distributed I/O System
EWA-4NEB 780602402-12