4. To assign a name to the IM151 PN an online PROFINET connection from the
programming device to the IO device via a switch is required.
Use Target system > Ethernet > Assign device name to send the device
name to the IM151-3 PN.
Figure 5-18
Send device name online to the IM151-3 PN
Click the Assign name button in the Assign device name dialog box. The
device name is saved to the MMC in the IM151-3 PN interface module.
Figure 5-19
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
"Assign device name" window before name assignment
Wiring and Fitting
5-31