Siemens SIMATIC ET 200S Manual page 266

Interface Modules
Updating the firmware of the IM151-1 HIGH FEATURE
Properties
• As of STEP 7 V5.1, ServicePack 3, you can update the firmware of the
IM151-1 HIGH FEATURE.
• To update the firmware you receive files (*.UPD) with the current firmware.
Prerequisites
• The IM151-1 HIGH FEATURE in the station whose firmware is to be updated
must be accessible online.
• The files with the current firmware version must be available in the file system
of your programming device or PC.
Procedure
The STEP 7 online help system provides information on how to proceed.
Note
We recommend you update the firmware using PROFIBUS DP.
Restrictions when operating the modules with the IM 151 HIGH FEATURE
The following modules cannot be used with the IM 151 HIGH FEATURE:
1Count 24V/100kHz
1Count 5V/500kHz
1SSI
EM 1STEP 5V/204kHz
1SI serial interface module
Modbus/USS serial interface module
2AI U; HIGH FEATURE
2AI I 2/4DMU; HIGH FEATURE
2AO U; HIGH FEATURE
8-22
Module Up to order number
6ES7 138-4DA02-0AB0
6ES7 138-4DE00-0AB0
6ES7 138-4DB00-0AB0
6ES7 138-4DC00-0AB0 3
6ES7 138-4DF00-0AB0
6ES7 138-4DF10-0AB0
6ES7 134-4LB00-0AB0
6ES7 134-4MB00-0AB0 1
6ES7 135-4LB00-0AB0
ET 200S Distributed I/O System
Up to product
version
1
1
3
1
1
1
1
EWA-4NEB 780602402-12