Terminal Assignment Of The 2Do 24 Vdc/2 A Standard - Siemens SIMATIC ET 200S Manual

Digital Electronic Modules
11.14 2DO 24 VDC/2 A ST digital electronic module
(6ES7 132-4BB30-0AA0)
Order number
6ES7 132-4BB30-0AA0
Properties
• Digital electronic module with two outputs
• Output current 2 A per output
• 24 VDC rated load voltage
• Suitable for solenoids, DC current protection and warning lights
Special feature
When the rated load voltage of 24 VDC is connected at the power module via a
mechanical contact, the digital outputs carry a "1" signal for approx. 50 µs because
of the circuit type. This must be considered when the module is connected to fast
counters.
Connection assignment
The following table shows the terminal assignment of the 2DO 24 VDC/2 A
Standard for the various terminal modules:
Table 11-22 Terminal assignment of the 2DO 24 VDC/2 A Standard
View
CH0
DO
0
1 5
VDC
2 6
M
3 7
A A
AUX1 (e.g. PE)
4 8
11-60
Terminal assignment
TM-E15S24-A1 and 2DO 24 VDC/2 A Standard
CH1
2-wire
DO
1
VDC
M
AUX1 (e.g. PE)
3-wire 4-wire
AUX1 must be occupied
with 4 wires at PE.
Remarks
Channel 0:
Terminals 1 to A4
Channel 1:
Terminals 5 to A8
DO: Output signal
(max. 2 A per channel)
24 VDC: Sensor supply
M : Load power supply
ground
ET 200S Distributed I/O System
EWA-4NEB 780602402-12