Example Of The Use Of The Reserve Modules - Siemens SIMATIC ET 200S Manual

Example of the use of the RESERVE modules

Future
planned
maximum
configuration
of the ET
200S
Basic config.
1st version:
Preparation
using
RESERVE
modules and
prewiring
OR
2nd version:
Preparation
using
RESERVE
modules and
prewiring. The
RESERVE
modules at the
right-hand end
of the station
are not present.
Figure 3-10 Example of the use of the RESERVE modules
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Basic
Option 1
config.
Sensors/actuators
Sensors/actuators
Configuration Options
This setup
must be
configured
(HWCONFIG,
COM
PROFIBUS)
Option 2
You must install
and wire this
configuration
You must install
and wire this
configuration
OR
3-37