Terminal Assignment Of The 2Ao I High Feature - Siemens SIMATIC ET 200S Manual

12.21 2AO I High Feature analog electronic module
(6ES7 135-4MB01-0AB0)
Order number
6ES7 135-4MB01-0AB0
Properties
• 2 current outputs
• Output range:
-- 20 mA, resolution 15 bits + sign
¦
-- 4 to 20 mA, resolution 15 bits
• Isolated for load voltage L+
• Supports clock synchronized mode
-- Minimum possible time for the clock-synchronized DP cycle (T
3.75 ms
-- Minimum possible conversion time of output modules: (T
Terminal assignment
The following table shows the terminal assignment of the 2AO I High Feature for
the various terminal modules.
Table 12-52 Terminal assignment of the 2AO I High Feature
View
CH0
QI
0
1 5
n. c.
2 6
M
ana
3 7
A A
AUX1 (e.g. PE)
4 8
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Terminal assignment
TM-E15S24-A1 and 2AO I High Feature
CH1
QI
1
n. c.
M
ana
AUX1 (e.g. PE)
Analog Electronic Modules
):
DPmin
): 1.5 ms
WAmin
Remarks
Channel 0: Terminals 1 to A4
Channel 1: Terminals 5 to A8
QI: analog output current
M : Module ground
ana
Terminals 2 and 6 can be
used for connection of cables
that are not required up to
30 VDC.
12-111