Siemens SIMATIC ET 200S Manual page 439

Table 12-33 Parameters RTD, TC analog electronic modules
2AI RTD 2AI TC
Standard Standard
------ Measurement
type/range
1)
With thermocouples only. A configuration error occurs when wire-break diagnostics and voltage
measuring range are enabled. The module does not start.
2)
Wire break is only detected with the constant current cables.
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
2AI TC High
Feature
•
------ disabled
•
Voltage
•
TC-EL Type T (Cu-CuNi)
•
TC-EL Type K (NiCr-Ni)
•
TC-EL Type B
(PtRh-PtRh)
•
TC-EL Type N
(NiCrSi-NiSi)
•
TC-EL Type E
(NiCr-CuNi)
•
TC-EL Type R (PtRh-Pt)
•
TC-EL Type S (PtRh-Pt)
•
TC-EL Type J
(Fe-Cu-Ni)
•
TC-EL Type L
(Fe-Cu-Ni)
•
Measurement disabled
type /range
•
Voltage
•
TC-EL Type T (Cu-CuNi)
•
TC-EL Type K (NiCr-Ni)
•
TC-EL Type B
(PtRh-PtRh)
•
TC-EL Type C
(WRe-WRe)
•
TC-EL Type N
(NiCrSi-NiSi)
•
TC-EL Type E
(NiCr-CuNi)
•
TC-EL Type R (PtRh-Pt)
•
TC-EL Type S (PtRh-Pt)
•
TC-EL Type J
(Fe-Cu-Ni)
•
TC-EL Type L
(Fe-Cu-Ni)
Analog Electronic Modules
Value range
TC-EL
Type K
80 mV
¦
(NiCr-Ni)
TC-EL
Type K
80 mV
¦
(NiCr-Ni)
Default Effective
setting range
Channel
Channel
12-33