Siemens SIMATIC ET 200S Manual page 512

Analog Electronic Modules
Analog Value Formation
Resolution (including sign)
Conversion time (per
channel)
Settling time
•
For resistive load
•
For capacitive load
•
For inductive load
Interference Suppression, Error Limits
Crosstalk between outputs
Operational error limits
(across the temperature
range, in relation to output
range)
Basic error limit (operational
error limit at 25 _C, related
to the output range)
Temperature error (in
relation to output range)
Linearity error (in relation to
output range)
Repetition accuracy (in
transient state at 25 _C,
relative to output range)
Output ripple, bandwidth 0
to 50 kHz (in relation to
output range)
12-106
10 V/ 16 Bit
¦
1 to 5 V/14 bits
Max. 1.0 ms
0.1 ms
0.5 ms
0.5 ms
> 60 dB
0.07 %
0.03 %
0.001 %/K
0.02 %
0.01 %
0.02 %
Data for selection of the actuator
Output range (nominal
value)
Load impedance (in the
nominal range of the
output)
•
With voltage
outputs
Capacitive load
Voltage output
•
Short-circuit protection
•
Short-circuit current
Destruction limit for
externally applied
voltages/currents
•
Voltage measured
between the outputs
and M
ANA
•
Current
Connection of actuators
•
Voltage output
2-wire connection
4-wire connection
ET 200S Distributed I/O System
 10 V
1 to 5 V
Min. 1.0 kΩ
max. 1 µF
Yes
Approx. 25 mA
Max. 15 V
continuous, 75 V for
max. 1 s (sampling
ratio 1:20)
max. DC 50 mA
Possible, without
compensation of
cable resistance
possible
EWA-4NEB 780602402-12